• Qubic System QS-CH2 2DOF Surge and Yaw Motion Platform for Sim Racing
  • Qubic QS-CH2 | 2DOF Surge and Yaw Motion Platform Qubic System
  • Qubic QS-CH2 | 2DOF Surge and Yaw Motion Platform Qubic System

Qubic System

Qubic QS-CH2 | 2DOF Surge and Yaw Motion Platform

Qubic QS-CH2 | 2DOF Surge and Yaw Motion Platform

Rated 4.1 out of 5
£9,000.00
£9,000.00
Sale Sold out
VAT included. No import fees.
Pay in 3 interest-free payments with PayPal. Subject to status.
Free UK
Delivery
UK Specialist
Support
Manufacturer
Warranty

Tilt based platforms approximate traction loss. The Qubic System QS-CH2 reproduces it properly. Instead of tipping the rig, it moves the entire cockpit forward, backward and sideways on the same industrial grade QS-220 linear actuators that sit inside the flagship QS-S25. The result is surge and yaw motion that genuinely replicates oversteer, understeer and longitudinal G the way a real car loads a driver, not the way a hinged platform pretends to. For rally, drift and anyone chasing the most honest traction loss simulation you can buy, nothing tilt based comes close. Expandable to five DOF when you are ready, with a QS-210 or QS-220 actuator set.

Motion controller required: Requires QS-MC6. Select the variant above that includes the QS-MC6 if you do not already own one. One QS-MC6 can control up to four Qubic actuator sets, so it continues to work if you later expand to 5DOF.


Optional Add-Ons InformationTap to view
Details on available add-ons for this product. Select the preferred add-ons for your setup above the add to cart button.
QS-BT1 Belt Tensioner Tightens your harness under braking and cornering for physical G-force feedback through your belts.
QS-BT1 Install Kit for QS-CH1 Mounting bracket to fit the QS-BT1 to a QS-CH1 cockpit installed on the CH2.
QS-H13 Seat Mover Adds pitch and roll seat motion on top of the CH2 surge and yaw. Gives you 4 axes total.
Racing Seat Universal racing seat compatible with Qubic System platforms.
Seat Belts - 4 Point Four-point racing harness. Required for use with the QS-BT1 belt tensioner.

Complete the experience with VR. Pair this platform with a Pimax headset for full cockpit immersion. View our Immersion range

Surge and YawTrue traction loss simulation
8 ms LatencyFastest in class
Expandable to 5DOFAdd QS-210 or QS-220 actuators
PC CompatibleAll major sim titles
VR ReadyFull VR compatibility
1000 Hz ControlMaximum precision feedback
Free UK DeliveryShips from Poland
2 Year WarrantyPersonal use coverage
QS-BT1 Belt Tensioner Tightens your harness under braking and cornering for physical G-force feedback through your belts.
QS-BT1 Install Kit for QS-CH1 Mounting bracket to fit the QS-BT1 to a QS-CH1 cockpit installed on the CH2.
QS-H13 Seat Mover Adds pitch and roll seat motion on top of the CH2 surge and yaw. Gives you 4 axes total.
Racing Seat Universal racing seat compatible with Qubic System platforms.
Seat Belts - 4 Point Four-point racing harness. Required for use with the QS-BT1 belt tensioner.
Type 2DOF motion platform, surge and yaw (traction loss)
Actuator Technology QS-220 high speed industrial linear
Surge Motion Up to 100 mm front to rear
Latency 8 ms
Control Frequency Up to 1000 Hz
Expandable Compatible with QS-210 and QS-220 3DOF sets for 5DOF total
Motion Controller QS-MC6 required (variant option)
Software Qubic Manager (free, PC only)
Use Cases Sim racing (rally, drift, GT, F1)
Warranty 2 years personal use, 1 year commercial use
Not Included Seat, steering wheel, pedals, monitor, PC
Our Recommendation
Surge and yaw chassis motion. Industrial actuators for professional and commercial use.
Shipping & Fulfilment
1 to 2 weeks delivery. Free UK delivery, all prices include VAT, no import fees or surprise charges. 2-year manufacturer warranty included.
Speak to a specialist
Free advice on configuration and compatibility.
Email Us Call Us
View full details

Traction Loss the Way It Actually Feels.

Most platforms fake traction loss by tilting. Roll left to suggest the rear stepped out. Pitch forward to suggest you stamped on the brakes. Your brain registers it as motion, but your body knows the difference. A real car doesn't tilt when the rear lets go. It rotates. It slides.

The QS-CH2 reproduces that honestly. Surge moves the whole cockpit forward and back for acceleration and braking. Yaw rotates it around the front to physically replicate oversteer the moment grip leaves the rear axle. No approximation, no compromise. Just the actual motion a car puts through a driver, delivered by the same QS-220 industrial actuators used in the flagship QS-S25.

How It Compares

Qubic System QS-CH2 2DOF Surge and Yaw Motion Platform for Sim Racing
Qubic QS-CH2
£9,000.00
ProSimu T1000 5M 'SV | 4DOF Motion Simulator | PRS200 Actuators
ProSimu T1000 5M
£9,395.00
ProSimu P5MP | 4DOF Motion Platform | PRS200 Actuators
ProSimu P5MP
£9,145.00
DOF 2 (Surge, Yaw) 4+TL 4+TL
Design Chassis motion Full simulator Platform for existing rig
Actuator Speed Industrial 280 mm/s 280 mm/s
Traction Loss Yaw axis
Heave
Noise Level Low Ultra-quiet Ultra-quiet
← Swipe to see all products →

Frequently Asked Questions

What is the difference between the QS-CH2 and a standard pitch and roll platform?

A standard pitch and roll platform tilts the rig to simulate braking, acceleration and cornering. The QS-CH2 moves the entire cockpit physically in the surge axis for braking and acceleration, and in the yaw axis for traction loss and oversteer. The physical feedback is fundamentally different because your body experiences the actual direction of force rather than an approximation through tilt.

Do I need the QS-MC6 motion controller?

Yes, the QS-MC6 is required for the QS-CH2 to operate. It is the communication link between your PC and the platform. If you do not already own one from a previous Qubic System purchase, select the variant above that includes the QS-MC6. If you already own one it will work with the QS-CH2 without any additional purchase.

What is included with the QS-MC6?

The QS-MC6 kit includes the USB motion controller, motion lock switch with 2 metre cable, M-BUS terminator, USB cable and CAT5E patch cord cable. Everything needed to connect the QS-CH2 to your PC is included in the kit.

Can I upgrade the QS-CH2 to 5DOF later?

Yes. The QS-CH2 is fully compatible with Qubic System QS-210 and QS-220 3DOF actuator sets. Adding one gives you 5DOF in total. The QS-MC6 you already own will continue to work with the expanded configuration as a single controller can manage up to four Qubic System actuator sets.

What simulation software does the QS-CH2 use?

The QS-CH2 uses Qubic Manager, available as a free download from Qubic System. It is compatible with all major racing and flight simulation titles on PC including Rally, Drift, GT and F1 titles and is continuously updated to support new releases.

What is the delivery time to the UK once available?

The QS-CH2 ships from Poland. Delivery to UK mainland addresses takes 1 to 2 weeks from dispatch. Free UK mainland delivery is included.

What warranty does the QS-CH2 come with?

The QS-CH2 carries a 2 year warranty for personal use and 1 year for commercial use. Post-sale technical support is provided directly by Qubic System via support.motionsystems.eu

Other Qubic motion platforms

1 4